Repeating Play; Playing Tracks In A Random Order; Scanning Folders And Tracks - Pioneer DEH-P80MP Operation Manual

MP3/WMA/WAV Player

Repeating play

For MP3/WMA/WAV playback, there are three
repeat play ranges: FOLDER (folder repeat),
TRK (one-track repeat) and DISC (repeat all
tracks).
1 Use Multi-Control to select Repeat.
Repeat appears in the display.
2 Press Multi-Control to select the repeat
range.
Press Multi-Control repeatedly until the de-
sired repeat range appears in the display.
! FOLDER  Repeat the current folder
! TRK  Repeat just the current track
! DISC  Repeat all tracks
Notes
! If you select another folder during repeat play,
the repeat play range changes to DISC.
! If you perform track search or fast forward/re-
verse during TRK, the repeat play range
changes to FOLDER.
! When FOLDER is selected, it is not possible to
play back a subfolder of that folder.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range,
FOLDER and DISC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Use Multi-Control to select Random.
Random appears in the display.
3 Press Multi-Control to turn random
play on.
Random :ON appears in the display. Tracks
will play in a random order within the pre-
viously selected FOLDER or DISC ranges.
# To turn random play off, press Multi-Control
again.

Scanning folders and tracks

While you are using FOLDER, the beginning of
each track in the selected folder plays for
about 10 seconds. When you are using DISC,
the beginning of the first track of each folder
is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Use Multi-Control to select Scan.
Scan appears in the display.
3 Press Multi-Control to turn scan play
on.
Scan :ON appears in the display. The first 10
seconds of each track of the current folder (or
the first track of each folder) is played.
4 When you find the desired track (or
folder) press Multi-Control to turn scan
play off.
Scan :OFF appears in the display. The track (or
folder) will continue to play.
# If the display has automatically returned to
the playback display, select Scan again by using
Multi-Control.
Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Section
07
31
En