Dell Vostro 15–3568 Owner's Manual page 73

Hide thumbs Also See for Vostro 15–3568:
Table of Contents

Advertisement

Table 13. Power Management
Option
AC Behavior
Auto On Time
USB Wake Support
Wake on LAN
Advanced Battery Charge
Configuration
Primary Battery Charge
Configuration
Table 14. POST Behavior
Option
Adapter Warnings
Fn Lock Option
Description
Allows you to enable or disable the computer from turning on automatically when an
AC adapter is connected.
Default Setting: Wake on AC is not selected.
Allows you to set the time at which the computer must turn on automatically. The
options are:
Disabled (default)
Every Day
Weekdays
Select Days
Allows you to enable USB devices to wake the system from Standby.
NOTE:
This feature is only functional when the AC power adapter is connected. If
the AC power adapter is removed during Standby, the system setup will remove
power from all of the USB ports to conserve battery power.
Enable USB Wake Support
Default Setting: The option is disabled.
Allows you to enable or disable the feature that powers on the computer from the Off
state when triggered by a LAN signal.
Disabled: This option is enabled by default
LAN Only
This option enables you to maximize the battery health. By enabling this option, your
system uses the standard charging algorithm and other techniques, during the non-
work hours to improve the battery health.
Disabled (default)
Allows you to select the charging mode for the battery. The options are:
Adaptive
Standard - Fully charges your battery at a standard rate.
Primarily AC use
Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom
Charge Stop.
NOTE:
All charging mode may not be available for all the batteries. To enable this
option, disable the Advanced Battery Charge Configuration option.
Description
Allows you to enable or disable the system setup (BIOS) warning messages when you
use certain power adapters.
Default Setting: Enable Adapter Warnings
Allows the hot key combination <Fn> +<Esc> toggle the primary behavior of F1–F12,
between the standard and secondary functions.
Lock Mode Disable/Standard. This option is enabled by default.
System Setup
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents