Velocitek Prostart Manual page 21

Maintenance
To ensure your ProStart's enclosure remains watertight and the electronics are not destroyed by
corrosion, please take the following precautions:

Dry case with a towel before opening.

Wipe away sand or debris on the gasket before closing the back case.

Once the case is open wipe away any loose water droplets.

If you ever see signs that water is leaking inside the enclosure please contact Velocitek
immediately at (866)-498-6737 or support@velocitek.com to arrange for your device to be
repaired and made watertight again.
Maintenance 20