Start Mode; Timer; Distance-To-Line; Distance-To-Line Bar Graph - Velocitek Prostart Manual

Start Mode

Start Mode
Indicator

Timer

Display
Indicator
Distance-
to-line
Display
Indicator
The start mode combines a timer and distance to line display to provide the information necessary for a
perfect start at the gun.
The semi-circles next to the
are set a line appears between them to illustrate that the line is set.
Timer
The count-down timer displayed as mm:ss. The time can be set from 1:00 to 15:00.

Distance-to-line

Distance-to-line is the perpendicular distance to the user defined line. Refer to Set the Start Line on
how to set the start line. Distance-to-line is displayed in meters. A negative distance-to-line means
that the boat is over the line. Three hyphens '---' are displayed when the line is not defined and a GPS
signal is available. When the distance-to-line is larger than 100 meters '>99' is displayed.

Distance-to-line Bar Graph

The distance-to-line bar graph provides a graphical representation for distance-to-line so you know
where you are relative to the line at a glance. The bar graph extends above and below the illustrated
line with each bar segment representing 10 meters.
PIN and RC buttons indicate if the respective ends are set. When both ends
Modes 9
Timer
Distance
Distance-to
-line Bar
Graph