Configuration; Compass Declination; Gps Data Storage - Velocitek Prostart Manual

Configuration

12
Configuration
Compass declination is the only user configurable setting on the ProStart. Bow offset has been
removed from this version. Instructions for configure the compass declination are on page 18.
Descriptions of this setting follow.

Compass Declination

When defined to the local declination, the heading will be referenced to local magnetic north. Positive
declination represents east and negative declination represents west. To reference the compass
measurement to true north, input 0 for compass declination. Default compass declination is 0 degrees.
When using a magnetic compass in conjunction with the ProStart, setting the compass declination to the
local declination is useful since both instruments will be referenced to magnetic north.
Bow Offset
This feature has been removed.

GPS Data Storage

The ProStart records GPS data whenever the device is on and GPS signal is detected. The device
records data every 2 seconds. The ProStart can store up to 30 hours of data.