How To Operate Usb Recording - Sharp AQUOS LX959H Operation Manual

Table of Contents

Advertisement

Other useful features

How to operate USB recording

You can enjoy DTV recording or playback by
connecting a commercially available USB HDD to the
TV.
CAUTION
• Do not unplug the AC cord or turn off the MAIN POWER
switch during USB recording timer setting or USB
recording.
• When the AC cord is unplugged and the MAIN POWER
switch is turned off:
− The USB recording timer setting is cancelled.
• USB recording may stop automatically when signal
reception is poor.
• Only this TV can playback the programme recorded on the
USB HDD connected to this TV. The programmes cannot
playback on other TV or PC.
SHARP corporation bears no responsibility
regarding compensation for content when
recording does not take place, loss of recorded
data or other direct or indirect damages related to
these matters. Please be forewarned.
Buttons for USB recording operation
Remote control unit
EXT MEDIA
EXT MEDIA
EXT MEDIA
TV
TV
INFO
INFO
Control panel
MENU
MENU
GUIDE
GUIDE
SLEEP
SLEEP
EXT MEDIA
EXT MEDIA
EXT MEDIA
TV
TV
INFO
INFO
MENU
MENU
GUIDE
GUIDE
SLEEP
SLEEP
Buttons
Displays the list of the programmes
recorded by USB recording.
REC
Start recording the programme you are
E
watching.
• You cannot playback the recorded
programme until several seconds after
pressing REC
REC STOP
Stop recording.
H
Playback the recorded programme.
d
Stop the programme in playback and go
H
back to the real time broadcast (live).
Pause the programme in playback
F
(USB recording continues).
• This function is released in 15 minutes.
Reverse (each time you press this button,
G
the reverse speed changes in three levels).
Fast forward (each time you press this
J
button, the fast forward speed changes in
three levels).
Jump backward to the previous chapter point*.
K
Jump forward to the next chapter point*.
L
Playback will resume after jumping
backward by the time interval you set in
"Jump time setting" (Page 86).
Playback will resume after jumping
forward by the time interval you set in
"Jump time setting" (Page 86).
* Chapter points are fixed at 10 minute increments.
NOTE
• Refer to Regarding "Select recording device" (Page 64)
when the buttons for USB recording do not work.
• Instead of pressing buttons on the remote control, most of
the operations shown to the left are also available on the
screen with the control panel. You can call up this control
panel by pressing CONTROL on the remote control or
select "Control (USB REC)" from "Menu" s "Setup" s
"Option" s "Option for view" s "Control (USB-REC)".
• USB recording stops if no operation detected for three
hours.
• When recording operations are not stopped manually,
recording will automatically stop after six hours.
• To release USB recording, press REC STOP
the DTV channel or change "INPUT".
• Some functions do not work during USB recording.
• USB recording does not start automatically, but starts only
when REC
is pressed or when a USB recording timer
E
setting is started.
• The PIN is required when you use the buttons such as
,
,
,
,
,
J
K
L
options for "Parental rating" except "None" are selected.
• Do not disconnect the USB HDD used for USB recording
during USB recording operation.
Description
to start recording.
E
, change
H
S
if you set the PIN and any
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents