Viewing 3D Images; Receiving A 3D Image Signal That Can Be Detected Automatically; Switching 3D To 2D Mode; Receiving A 3D Image Signal That Cannot Be Detected Automatically - Sharp AQUOS LX959H Operation Manual

TV TV
Enjoying 3D image

Viewing 3D images

NOTE
• The TV screen may temporarily become black when the TV
is trying to detect a 3D image signal and when switching
from 3D to 2D mode.
Receiving a 3D image signal that can be
detected automatically
The image signal may contain a 3D identification signal. You
can enable the TV to automatically detect the 3D image type
(See page 56).
Go to "Menu" s "Setup" s "Option" s "3D
1
setup" s "3D auto change".
E When "3D auto change" is set to
"Mode1"or "Mode2"
• The 3D display format is detected automatically and
the appropriate 3D image is displayed.
E When "3D auto change" is set to "Off"
1 The confirmation message is displayed. Press 3D.
2 Press c / d to select "Yes", and then press ? .
Turn on the power of the 3D glasses, and then
2
wear the 3D glasses.
NOTE
• If you do not want to switch to 3D mode automatically, set
"3D auto change" to "Off".
• When the TV is receiving a 3D image signal that can be
detected automatically, the 3D mode icon is displayed in
the channel display.

Switching 3D to 2D mode

When you press 3D while you are watching the TV in
3D mode, the TV switches to 2D mode.
Press 3D during the 3D mode.
1
Select "Yes", and then press ? to switch to
2
2D mode.
INFO INFO
MENU MENU
GUIDE GUIDE
SLEEP SLEEP
Take off the 3D glasses and turn off the power
3
of the 3D glasses.
NOTE
• If the input signal switches to 2D, 2D images are displayed
automatically.
• 3D mode is canceled automatically when the setting
is changed, input source is changed, the input signal
resolution is changed or the power is turned off.
Receiving a 3D image signal that cannot
be detected automatically
When the TV receives a 3D image signal that cannot
be detected automatically, you can select between 3D
and 2D image viewing.
Press 3D.
1
• A screen appears prompting you to select
between 3D and 2D image viewing.
Press c / d to select "3D" or "2D", and then
2
press ? .
E To view in 3D mode
1 Press c/d to select the 3D signal type ("2D s
3D","Side by Side" or "Top and Bottom"), and then
press ?.
• You can select only "2D s 3D" in ATV mode.
• If you select the same system as that of the input
signal, 3D images are displayed.
2 Turn on the power of the 3D glasses, and then wear
the 3D glasses.
E To view in 2D mode
• Switching from 3D to 2D mode.
Press c / d to select the 2D signal type ("Side by
Side" or "Top and Bottom"), and then press ? .
Side by Side
• If you select the same system as that of the input
signal, 2D images are displayed.
Side by Side
Top and Bottom
Top and Bottom
57