How To Make A Simple Platform (For Lc-70Lx959H Only) - Sharp AQUOS LX959H Operation Manual

Preparation

How to make a simple platform (For LC-70LX959H only)

To make such a simple platform, you need to use the packing box and the four foam blocks inside it: TOP-L,
TOP-C, TOP-R and SIDE-R.
1 As shown in the following figure, remove the
three foam blocks TOP-L, TOP-C and TOP-R
on the top.
Front
As illustrated in the following figure,
2
disassemble the packing box from one side.
And remove the two foam blocks on both
sides.
12
3 1 As shown in Figure A, reassemble the packing
box from the side, and place it face down.
2 Attach the foam blocks TOP-L and TOP-R onto
the left side and right side of the packing box
respectively (as shown in Figure B).
3 Insert the foam blocks TOP-C,SIDE-R into the
packing box (as shown in Figure B). Now, a
simple platform is ready.
NOTE
• Put the platform on the flat floor after you have made it.
• When installing the stand, you need to put the TV face
down on the simple platform. Before that, put a shock pad
on the platform to protect the screen.
• The simple platform is just for temporary use. Do not apply
any load exceeding the weight of the LCD TV onto this
platform.
Figure A
Figure B