Safety Instructions - Nobu N12WTS User Manual

NOBU Fanless Inwall Touchscreen PC

Safety Instructions

1. Always read the safety instructions carefully.
2. Keep this User's Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before initial configuration.
5. The openings on the case are for air convection hence they help protect
the equipment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source to be used with the N12WTS
is between 90-264VAC.
7. Be sure to follow all precautions listed on the Temporary Power Cord
reference sheet included with the N12WTS.
8. It is recommended to disconnect the power source before inserting any
add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the openings. Liquid can cause damage or
electrical shock. When cleaning screen or bezel never apply fluids of any
kind directly onto the unit. See Maintenance section of this manual.
11. If any of the following situations arise, get the equipment checked by
Nobu service personnel:
• The power terminal is damaged
• Liquid has penetrated into the equipment
• The equipment has been exposed to moisture
• The equipment is not functioning properly according
to the User's Manual.
• The equipment has been dropped and/or damaged
• If the equipment has obvious signs of damage
12. Do not leave this equipment in an environment unconditioned such as in
temperatures above 60˚ C (140˚F), it may damage the equipment.
- 4 -
N12WTS
v3.42