Nobu N12WTS User Manual page 12

NOBU Fanless Inwall Touchscreen PC
N12WTS
v3.42
A rectangular hole should be cut in the wall corresponding to the size of the
bracket. It is easiest to trace the outer diameter of the bracket with a pencil
for proper sizing. Once the hole has been cut, slide the bracket into the wall
opening. The bracket can be screwed onto a stud or can be secured by
bending the numerous perforated metal tabs. The tabs are more than
sufficient to secure the unit in place.
Figure 1.5 Bracket secured into wall
- 11 -