Nobu N12WTS User Manual page 13

NOBU Fanless Inwall Touchscreen PC
N12WTS
v3.42
Once the bracket is secured, any necessary cables/modules should be
connected to the N12WTS such as: power, CAT5 ethernet, microphone, S-
Video out, USB wireless mouse/keyboard, PCMCIA wireless card, etc.
CAUTION: The power to the corresponding electrical circuit and/or all
structural power should be safely turned off before connecting the
110/220v bare wire to the terminal block on the top of the N12WTS (see
Figure 1.6 & 1.7.) Installation should only be performed by a licensed
electrician. Installation by an unlicensed person will void the warranty.
Figure 1.6 Connect cables
- 12 -