Table of Contents
Advertisement
1.
Always read the safety instructions carefully.
2.
Keep this User's Manual for future reference.
3.
Keep this equipment away from humidity.
4.
Lay this equipment on a reliable flat surface during initial configuration.
5.
The openings on the case are for air convection hence they help protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
6.
Make sure the voltage of the power source to be used with the N8WTS is between 90-
264VAC.
7.
Follow all precautions listed on the Temporary Power Cord
reference sheet included with the N8WTS.
8.
It is recommended to disconnect the power source before inserting any add-on card or
module.
9.
All cautions and warnings on the equipment should be noted.
10.
When cleaning screen or bezel never apply fluids of any kind directly onto the unit. See
Maintenance section of this manual. Never pour any liquid into the openings. Liquid can
cause damage or electrical shock.
11.
If any of the following situations arise, get the equipment checked by Nobu service personnel:
• The power terminal is damaged
• Liquid has penetrated into the equipment
• The equipment has been exposed to significant moisture
• The equipment is not functioning properly according
to the User's Manual.
• The equipment has been dropped and/or damaged
• If the equipment has obvious signs of damage
12.
Do not leave this equipment in an environment unconditioned such as in temperatures above
60˚ C (140˚F), it may damage the equipment.
4
Safety Instructions
June 2008 v1.2
Advertisement
Table of Contents
