Table of Contents
Advertisement
NOBU Fanless Inwall Touchscreen PC
Temporary Power Cord
The included power cable is for configuring the NOBU Touchscreen PC prior to
installation only. The installation of this NOBU unit should be performed by a
licensed/certified electrician.
CAUTION:
The cable consists of (3) 18 gauge wires stripped ½" from end. Connect the wires to the
corresponding terminals inside the power compartment on the PC BEFORE plugging the
cord into a live outlet. Unplug the cord from outlet BEFORE removing the wires from
the power terminals.
Please use extreme caution during this portion of setup.
Black
= HOT
White
= NEUTRAL
Green
= GROUND
Category
Shielding
Jacket Color
Length Feet
Length Meters
Temperature Rating
Color Coding
AWG Stranding
Nominal OD Inch
Nominal OD
millimeter
Rating
3 conductor plastic original
equipment cords
unshielded
Grey
6'
1.83
60°C
North America
18 (41x34)
0.246
6.25
1250 Watts,10A-125V
- 8 -
N12WTS
v3.42
Advertisement
Table of Contents
