Ir Sensor; Batteries - Philips 49PUG6801 User Manual

To write text...
1 - Select a text field if it is not yet selected.
2 - Turn the remote control keyboard facing upwards
to activate the keyboard keys. Hold the remote
control with two hands and type with both thumbs.
3 - To hide the on-screen keyboard,
press  BACK.
Press OK to confirm the text.
On-screen Keyboard
If you use the on-screen keyboard to enter text, you
can configure the keyboard layout to a layout you are
used to.
To open these settings...
Press  HOME, select All Settings and press OK.
5 - Select Android Settings and press OK.
6 - Select Preferences >  Keyboard and
press OK.
7 - Select Configure > Language and press OK.
You can set your language keyboard layout here.
8 - Press  BACK to close the menu to go back
one step.
Uppercase and Lowercase
To type an uppercase character, press the  (Shift)
key just before you type the character.
To type several uppercase characters consecutively,
press and hold the  key while typing.
To type uppercase constantly, press the  key for
2 seconds to switch the keyboard in uppercase mode.
To switch out of uppercase mode, press the  key
again. If no keys are pressed for 20 seconds, the
uppercase mode switches off automatically. Also, if
you press another modifier key, like Fn or Ω, you
switch out of uppercase mode.
Numbers and Punctuation Characters
To type a number or punctuation character, press
the Fn key just before you type the number or
punctuation character you need. You can switch the
Fn mode on or off as you do for the uppercase mode.
Internet
You can use the Fn key to enter www. or .com.
Accented Letters and Symbols
Accented characters and symbols are not directly
available on the Remote Control Keyboard.
To type such a character, you can open the On-
screen keyboard.
To open the on-screen keyboard, press Ω on the
back of remote control. In the on-screen keyboard,
you can navigate to the character you need. Switch
the keyboard layout with the color keys. Press OK to
enter a character. The on-screen keyboard
disappears when you press a character on the
Remote Control Keyboard.
6.4

IR Sensor

The remote control of the TV uses BT (bluetooth) to
send its commands to the TV. With BT, you do not
need to point the remote control at the TV.
However, the TV can also receive commands from a
remote control that uses IR (infrared) to send
commands. If you use such a remote control, always
make sure you point the remote control at the
infrared sensor on the front of the TV.
6.5

Batteries

The TV will notify you when the battery power of the
remote control is low.
To replace the batteries, open the battery
compartment on the keyboard side of the remote
control.
1 - Use a small coin or other small, blunt object and
press the rectangular shaped release button to open
the battery lid.
2 - Replace the old batteries with 2
type AA-LR6-1.5V alkaline batteries. Make sure the
+ and the - ends of the batteries line up correctly.
3 - Reposition the battery door and push it down
until it clicks.
Put the remote control down for about 15 seconds to
calibrate the pointer.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
For more information, press
up End of use.
27

Keywords and look