Voice Search; Ir Sensor - Philips 7408 Series User Manual

1 - EXIT
To return to the previous menu.
2 - Volume
Press + or - to adjust the volume level.
3 - Number buttons
To select a channel directly.
4 - (Dot)
To enter digital sub-channels. Long press to open
Caption Setup.
5 - Channel
Press + or - to switch to the next or previous channel in
the channel list.
6 - Mute
Press to mute the sound or to restore it.
7 - DASHBOARD
To launch Dashboard on the side of the screen to access
Settings, device controls, notifications and more.
Pair Your Remote Control to the TV
This remote control uses both Bluetooth® and IR
(infrared) to send its commands to the TV.
• You can use this remote control via IR (infrared) for
most operations.
• To use advanced operation like voice search and
remote control keyboard, you need to pair (link) the TV
with the remote control.
When you start the initial TV installation, the TV invites
you to press the Home + Back key to pair with the
remote control. It is best to complete the pairing when
you first install the TV.
Note:
1 - Once the remote control has entered pairing mode
successfully, the blue LED indicator ring around the
microphone on the front side of the remote control
starts blinking.
2 - The remote control must be kept close to the TV
(within 3 feet) during pairing in order to ensure success.
3 - If the TV does not launch the voice control field when
you press Google Assistant™, pairing was unsuccessful.
4 - It is advisable to wait until the set has fully started up
and launched all background processes before pairing
mode is entered as the toast message containing further
instructions may appear too late, thereby negatively
impacting the pairing procedure.
Pairing again
If the pairing with the remote control was lost, you can
pair the TV with the remote control again.
You can press the Home + Back key or long press the
PAIR (SOURCES) key (for about 3 seconds) for pairing.

3.2. Voice Search

You can search for videos, music or anything else on the
Internet by simply using your voice. You can speak into
the microphone on the remote control.
You need to pair the remote control to the TV before use
voice search.
To use Voice...
1 - Press Google Assistant™ on remote control, the blue
light on the remote control lights up and the search field
opens, the microphone is active.
2 - Speak out what you are looking for with clear
pronunciation. You can speak for 10 seconds before the
microphone switches off. It might take some time for the
results to appear.
3 - In the list of search results, you can select the item you
want.

3.3. IR Sensor

The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use such
a remote control, always make sure you point the remote
control at the infrared sensor on the front of the TV.
Warning
Do not put any objects in front of IR sensor of the TV as it
may block the IR signal.
9