Related Manuals for Philips 32PFT4131
Summary of Contents for Philips 32PFT4131
- Page 1 Register your product and get support at 4131 series www.philips.com/welcome User Manual 32PFT4131 32PHT4131 43PFT4131 49PFT4131...
-
Page 2: Table Of Contents
Contents 12.2 Play your videos 1 TV tour 12.3 View your photos 1.1 Pause TV and recordings 12.4 Play your music 1.2 EasyLink 13 Settings 2 Setting up 13.1 Quick settings 2.1 Read safety 13.2 Picture 2.2 TV stand and wall mounting 13.3 Sound 2.3 Tips on placement 13.4 Eco settings... -
Page 3: Tv Tour
TV tour Pause TV and recordings If you connect a USB Hard Drive, you can pause and record a broadcast from a digital TV channel. Pause your TV and answer that urgent phone call or simply take a break during a sports match, while the TV stores the broadcast on the USB Hard Drive. -
Page 4: Setting Up
When seated, your eyes should In case you lost this guide, you can download it be level with the centre of the screen. from www.philips.com. Use the model number of the TV to look for the Quick Start Guide to download. -
Page 5: Antenna Cable
consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. For more information, in Help, see chapter Switching On and Off . Antenna cable Insert the antenna plug firmly into the Antenna socket at the back of the TV. -
Page 6: Network For Freeview
setting of the router. DHCP should be switched on. Network for **To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet cable. Freeview (for Network settings 4031/05, 4131/05 View network settings series TV) You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc. -
Page 7: Connect Devices
Only HDMI 1 on the TV have HDMI ARC (Audio Return Channel). If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The If the device, typically a Home Theatre System (HTS), guide offers information on how to connect and also has the HDMI ARC connection, connect it which cables to use. - Page 8 (Consumer Electronics Control) to communicate with and add an Audio L/R cable (mini-jack 3.5mm) to the connected devices. Devices must support HDMI Audio In for sound, on the back of the TV. CEC and must be connected with an HDMI connection.
-
Page 9: Cam With Smart Card - Ci
CAM with smart card - CI+ This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV operators Passwords and PIN codes in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ For some CAMs, you must enter a PIN code to watch module. -
Page 10: Home Theatre System - Hts
Connect with HDMI Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Switch Off Timer Soundbar or an HTS with a built-in disc player. -
Page 11: Blu-Ray Disc Player
For some Home Theatre Systems you might need to Audio out levelling adjust the audio sync delay to synchronise the audio to the video. On the HTS, increase the delay value Use the Audio Out Levelling setting to level the until there is a match between picture and sound. -
Page 12: Dvd Player
If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote To adjust the volume… control. 1. Press , select Sound > Headphone volume and press OK. 2. Press the arrows (up) or (down) to adjust the value. -
Page 13: Usb Hard Drive
Warning Ideal setting The USB Hard Drive is formatted exclusively for this Before you start playing a game from a connected TV, you cannot use the stored recordings on another game console, we advice you to set the TV in the TV or PC. -
Page 14: Photo Camera
To disconnect the USB flash drive, you can pull out the flash drive anytime. For more information on watching or playing content from a USB flash drive, in Help, see chapter Photos, videos and music. 4.11 Photo camera To view photos stored on your digital photo camera, you can connect the camera directly to the TV. -
Page 15: Switching On And Off
Sleep timer Switching On and With the Sleep timer, you can set the TV to switch to Standby automatically after a preset time. To set the Sleep timer… 1. Press , select General settings > Sleep On or standby timer and press OK. -
Page 16: Remote Control
To open or close the Sources menu - the list of connected devices. Remote control Colour keys The buttons function follow the on-screen instructions. Key overview INFO To open or close programme infomation. BACK To switch back to the previous channel you selected. To close a menu without changing a setting. -
Page 17: Ir Sensor (For 4031/5231 Series Tv)
To open or close Text / Teletext. the - ends of the batteries line up correctly. 3. Reposition the battery door and slide it back until it clicks. 4. Remove the batteries if you are not using the remote control for a long time. IR sensor (for 4031/5231 Safely dispose of your old batteries according to the series TV) -
Page 18: Channels
Filter a channel list Channels You can filter a list with all channels. You can set the channel list to show only TV channels or only Radio stations. Switch channels To set a filter on a list with all channels… 1. -
Page 19: Channel Options
rating for your child, the programme will be locked. Remove channel from the favourites list To watch a locked programme you must enter the child lock code. The parental age rating is set for all To remove a channel from the favourites list, select channels. - Page 20 2. Select Languages and press (right) to enter Preferred subtitle languages the menu. 3. Select Primary A digital broadcast can offer several subtitle audio language or Secondary audio language, languages for a programme. You can set a preferred and press OK. primary and secondary subtitle language.
-
Page 21: Text / Teletext
display correctly. Status - Text 2.5 To activate the Text 2.5 for more colours and better Select Status to view technical information on the graphics. channel (if it is analogue or digital) or a connected device you are watching. Text setup Text / Teletext Text language Some digital TV broadcasters have several Text... -
Page 22: Tv Guide
Change day TV Guide The TV guide can show scheduled programmes for the upcoming days (maximum up to 8 days). If the TV guide information comes from the What you need broadcaster, you can press + to view the schedule of one of the next days. - Page 23 4. Select Close to close the list of reminders. Set a recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with ...
-
Page 24: Recording And Pause Tv
1. Press TV GUIDE. 2. On the TV guide, select the channel and Recording and programme you wish to record. Press (Right) or (Left) to scroll through the programmes of a pause TV channel. 3. With the programme highlighted, press the colour ... -
Page 25: Pause Tv
set the hours and minutes. To switch back to the live TV broadcast, press (Stop). 9. Select Schedule and press OK to schedule the manual recording. The recording will appear in the list of scheduled Replay recordings and reminders. Since the TV stores the broadcast you are watching, you can mostly replay the broadcast for a few Watch a recording... -
Page 26: Home Menu
Home menu 10.1 About the Home menu Channels This row contains all channles. Sources This row contains available sources in this TV. Utilities This row contains TV functions which are available for user. Quick settings This row contains settings which are available for user. -
Page 27: Sources
clear. A game console can have a built-in Blu-ray Disc player and the type is set to Player because it is Sources used as a disc player most of the time. For this kind of devices, you can temporarily switch to the ideal settings for gaming. -
Page 28: Videos, Photos And Music
To show the progress bar when a video is playing, press INFO. Videos, photos and Press again to hide the info. music Video options 12.1 During the video playback, press OPTIONS to… From a USB connection Subtitles Display the subtitles if available, select On, Off, or On You can view your photos or play your music and during mute. -
Page 29: Play Your Music
To view info on a photo (size, creation date, file path, Play music etc.), select a photo and press INFO. Press again to hide the info. How you open the list of your media files on TV depends on the type of device where the files are stored. -
Page 30: Settings
13.2 Picture Settings Picture style 13.1 Quick settings Select a style For easy picture adjustment, you can select a preset Eco settings Picture Style. For more information, in Help, see chapter Eco 1. While watching a TV channel, press . settings. - Page 31 1. Press , select General settings and Advanced picture settings press (right) to enter the menu. 2. Select Location > Home and press OK. Game or computer 3. Press (left) repeatedly if necessary, to close the menu. When you connect a device, the TV recognizes its type and gives each device a correct type name.
- Page 32 4. Press (left) repeatedly if necessary, to close the Brightness menu. With Brightness, you can set the level of brightness of the picture signal. Brightness is a setting intended for expert users. We recommend non-expert users to Custom colour temperature adjust the brightness of the picture with With Custom colour temperature, you can set a the Contrast setting.
-
Page 33: Sound
1. Press , select Picture and press (right) to the Picture format menu. enter the menu. 2. Select a format from the list and press OK. 2. Select Advanced > Sharpness > Super resolution, and press (right) to enter the menu. 3. - Page 34 1. While watching a TV channel, press . Advanced sound settings 2. Select Sound and press (right) to enter the menu. Auto volume levelling 3. Select Sound style , and select the Sound Style you want to restore. With Auto volume levelling, you can set the TV to ...
- Page 35 If you have a Home Theatre System (HTS) Automatic audio to video sync with multichannel sound processing capabilities like With recent Philips Home Theatre Systems, the audio Dolby Digital, DTS® or similar, set the Audio Out to video sync is done automatically and always Format to Multichannel.
-
Page 36: Eco Settings
4. Press (left) repeatedly if necessary, to close the Screen off menu. If you only listen to music, you can switch off the TV screen to save energy. Headphone volume To only switch off the TV screen… With Headphones volume, you can set the volume of 1. - Page 37 the menu. Language preferences 3. Select Primary subtitle language or Secondary subtitle language, and press OK. Audio language 4. Select the language you need and press OK. 5. Press (left) repeatedly if necessary, to close the A digital broadcast can offer several audio languages menu.
- Page 38 To stop the automatic rotation of subpages. Clock - Dual screen / Full screen To show the TV channel and Text alongside each Date and time other. Automatic - T.O.P. overview To open T.O.P. Text. In some countries, digital broadcasts do not send UTC - Enlarge - Coordinated Universal Time information.
- Page 39 during the countdown. Location 3. Press (left) repeatedly if necessary, to close the menu. If the TV is installed in a shop, you can set the TV to display an in store promotion banner. Picture style is set to Vivid automatically. Switch off Switch off timer timer is switched off.
-
Page 40: Child Lock
13.7 Channel list copy Universal access For more information, in Help, see chapter Channel installation > Channel list copy. Switch on With Universal access switched on, the TV is 13.6 prepared for use for the deaf, hard of hearing, blind or Child lock partially sighted people. - Page 41 With Audio Description, a narrator's commentary is menu. added to the normal audio. To switch on the commentary (if available)… Speech To switch on Audio Description… 1. Press , select Universal access and The audio commentary can also hold subtitles for the press ...
-
Page 42: Channel Installation
4. Select Update channels and press OK. 5. Press BACK to close the menu. Channel installation Reinstall channels 14.1 Antenna/cable installation Reinstall all channels Update channels You can reinstall all channels and leave all other TV settings untouched. Automatic channel update If a PIN code is set, you will need to enter this code before you can reinstall channels. - Page 43 values, the network ID or network frequency, enter search for channels, select Manual. these values when the TV asks for them during installation. Network frequency Channel Number Conflicts With the Network frequency mode set to Manual, In some countries, different TV channels you can enter the network frequency value received (broadcasters) might have the same channel number.
-
Page 44: Channel List Copy
With Channel List Copy, you can copy the channels enter the symbol rate value, use the number keys. installed on one TV onto another Philips TV of the same range. With Channel List Copy, you avoid the time-consuming channel search by uploading a predefined channel list on a TV. - Page 45 Now you can upload the copied channel list onto 4. Select Channel List Copy > Copy to TV and another Philips TV. press OK. Enter your PIN code if necessary. 5. The TV notifies you if the channel list is copied to the TV successfully.
-
Page 46: Software
15.1 This is a document describing the distribution of the Software version source code used on the Philips TV, which fall either under the GNU General Public License (the GPL), or To view the current TV software version… the GNU Lesser General Public License (the LGPL), or 1 - Press ... - Page 47 libboost (1.51) MTD utility (1.5.0) Boost provides free peer-reviewed portable C++ MTD subsystem (stands for Memory Technology source libraries, and emphasize libraries that work Devices) provides an abstraction layer for raw flash well with the C++ Standard Library. devices. It makes it possible to use the same API when working with different flash types and Boost libraries are intended to be widely useful, and technologies, e.g.
-
Page 48: Specifications
1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TV When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. -
Page 49: Reception
- Mains power : AC 220-240V +/-10% - 1080p - 24 Hz, 25 Hz, 30 Hz - Ambient temperature : 5°C to 35°C Computer formats - Power saving features : Eco mode, Picture mute (for radio), Auto switch-off timer, Eco settings menu. Resolutions (amongst others) For power consumption information, see - 640 x 480p - 60 Hz... -
Page 50: Connectivity
mm - Weight ± 8.46 kg - AVI, MKV, H.264/MPEG-4 AVC, MPEG1, MPEG2, MPEG4, WMV9/VC1, HEVC 49PFx4131 Supported subtitle format - without TV stand: - SRT, SMI, SSA, SUB, ASS, TXT Width 1099.2 mm - Height 645.4 mm - Depth 81.2 mm - Weight ±... -
Page 51: Help And Support
Register your TV and enjoy a range of benefits including full support (including downloads), When the TV is in standby, a Philips startup screen is privileged access to information about new products, displayed, then the TV returns to standby mode. This exclusive offers and discounts, the chance to win is normal behaviour. -
Page 52: Online Help
- Make sure that the TV audio output is connected to the audio input on the Home Theatre System. To solve any Philips TV related problem, you can - Sound should be heard from the HTS speakers. consult our online support. You can select your - Some devices may require you to manually enable language and enter your product model number. -
Page 53: Consumer Care / Repair
For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . TV model number and serial number You might be asked to provide the TV product model number and serial number. -
Page 54: Safety And Care
TV to the wall or a suitable support. Contact Philips TV Consumer Care to have the TV - Teach children about the dangers of climbing on checked before use. -
Page 55: Screen Care
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. -
Page 56: Terms Of Use, Copyrights And Licenses
TP Vision is the warrantor in relation to the TP Vision manufactures and sells many products TV with which this booklet was packaged. Philips and targeted at consumers which, like any electronic the Philips Shield Emblem are registered trademarks apparatus, in general have the ability to emit and of Koninklijke Philips N.V. - Page 57 Dolby Digital Plus Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DTS 2.0 + Digital Out ™ For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc.
-
Page 58: Index
Network, wired 6 Connect, USB Flash Drive 13 Noise Reduction 33 Connectivity Guide 7 Consumer Care 53 Contact Philips 53 On a TV stand, TV Placement 36 Contrast 31 On the wall, TV Placement 36 Contrast, Contrast Mode 32 Online support 52... - Page 59 Options on a Channel 19 TV Guide, Reminder 22 TV Installation 42 Partially sighted 40 Pause TV 25 Universal access 40 Photo camera, connect 14 Universal access, Hard of hearing 40 Photos, videos and music 28 Universal Access, Speakers/Headphones 41 Picture Format, advanced 33 USB Hard Drive, disk space 13 Picture Format, basic 33...