Remote Control Button - Panasonic cs-s9pkv Service Manual

14.2 Remote Control Button

14.2.1 SET Button

To check remote control transmission code and store the transmission code to EEPROM.
Press "Set" button continuously for 10 seconds by using pointer.
o
Press "Timer Set" button unit a "beep" sound is heard as confirmation of transmission code change.
o
Confirm setting by pressing "Timer Set" button, a "beep" sound will be heard. LCD returns to original display
o
after 2 seconds.
LCD returns to original display if remote control does not operate for 30 seconds.
o
14.2.2 RESET (RC)

To clear and restore the remote control setting to factory default.
Press once to clear the memory.
o
14.2.3 RESET (AC)

To restore the unit's setting to factory default.
Press once to restore the unit's setting.
o
14.2.4 TIMER ▲

To change indoor unit indicators' intensity:
Press continuously for 5 seconds.
o
14.2.5 TIMER ▼

To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F).
Press continuously for 10 seconds.
o
89