Miele DA 270 U Operating And Installtion Instructions page 28

Installation
Installation
^ Hold the mounting plate up to the
ceiling so that the orange arrow faces
the front of the hood and aligns with
the line drawn on the ceiling.
^ Mark the position of the four
mounting bolts a for securing the
mounting plate and determining the
position of the hole the power cord b
will pass through. Select the hole
providing the shortest route for the
power cable b to reach the power
terminal located at the top of the
hood's chimney.
28
^ Drill four
3
/ " (10 mm) holes in the
8
ceiling.
The S10 wall anchors included in the
packaging are not for use in
USA/CDN. Be certain that the ceiling
is stable enough to support the
hood.