Grease Filter - Miele DA 270 U Operating And Installtion Instructions

Cleaning and Care

Grease filter

The reusable metal grease filter
removes solid particles from the vented
kitchen air (grease, dust, etc).
The grease filters should be cleaned
every 3 - 4 weeks or whenever the
grease filter indicator lights.
A dirty filter is a fire hazard.
^ To remove the grease filters press the
locking clips in towards the middle of
the filter while supporting the filter so
it does not fall on to the cooktop.
^ Hold the grease filter at the handle
and lower it out of place.
16
^ Clean the filters
– by hand: use a scrub brush in
warm water with a mild detergent.
– in a dishwasher: Place the grease
filters vertically in the lower basket,
making sure that the spray arm is not
blocked.
Depending on the detergent,
cleaning the grease filters in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter will not be
affected by this discoloration.
^ After cleaning, the filters can be
placed on a towel to air dry.
^ While the filters are removed, clean
any dirt or grease from the filter
casing to prevent the risk of fire.
When putting the grease filters back
make sure that the locking clips are
visible facing the cooking surface.
If the filters are incorrectly installed,
insert a small screwdriver into the slit
along its edge to disengage it from the
casing.
^ After returning the grease filters,
press the grease filter button for 3
seconds to reset the timer. The
indicator light will go out.
^ If the grease filters are cleaned
before the grease filter timer has
reached its maximum, the grease
filter button should be pressed for 6
seconds to reset the counter to zero.