Active Charcoal Filters - Miele DA 270 U Operating And Installtion Instructions

Active charcoal filters

The recirculation mode requires two
active charcoal filters in addition to the
grease filters. The active charcoal filters
are designed to absorb cooking odors.
The active charcoal filters will be
placed in the canopy above the grease
filters.
Replacement active charcoal filters
(part # 03 284 680) can be ordered
from the Miele Technical Service
Department.
USA 1-800-999-1360
CDN 1-800-565-6435
^ The grease filters must be removed
to access the active charcoal filters
(see "Cleaning and Care / Grease
filters").
Cleaning and Care
^ Insert the active charcoal filter.
Before using:
Program the active charcoal filter timer,
see "Operation/Reprogramming the
active charcoal filter timer".
Replace the active charcoal filters when
the active charcoal filter indicator
lights. Replace the filters at least every
6 months or when they no longer
absorb odors efficiently.
^ After replacing the active charcoal
filters, press and hold the active
charcoal filter button for 3 seconds to
reset the timer.
The indicator light will go out.
^ If the active charcoal filters are
replaced before the timer has
reached its maximum, the active
charcoal filter button should be
pressed for 6 seconds to reset the
counter to zero.
17