Checking Network Settings - Canon w-e1 Instruction Manual

Checking Network Settings

Windows

Open the Windows [Command Prompt], then type ipconfig/all and
press the <Enter> key.
The IP address assigned to the computer is displayed and so as the
subnet mask, gateway, and DNS server information.
Mac OS

In Mac OS X, open the [Terminal] application, enter ifconfig -a, and
press the <Return> key. The IP address assigned to the computer is
indicated in the [en0] item next to [inet], in the format "***.***.***.***".
* For information about the [Terminal] application, refer to the Mac OS X help.
To avoid using the same IP address for the computer and other devices
on the network, change the rightmost number when setting the IP
address assigned to the camera in the processes described on page
92.
Example: 192.168.1.10
87