Basic Operation and Settings
The basic operation for using the W-E1's Wi-Fi functions is explained
here. Follow the procedures below.
For further connection settings, see "Easy Connection" (p.19) or
"Advanced Connection" (p.33).
When multiple-exposure shooting is set, you cannot select [53: Wi-Fi
function].
Interface Cable Connection Cautions
When the W-E1 is installed in the camera, you cannot use the camera by
connecting it to Connect Station, a computer, a Wireless File Transmitter,
a printer, or another device with a cable. Remove the W-E1 from the
camera before connecting a cable.
Cards
For [q], the camera cannot be connected wirelessly if there is no CF
card in the camera.
Using the Camera with a Wireless Connection Established
When you want to prioritize the wireless connection, do not operate the
power switch, card slot cover, battery compartment cover, Mode Dial,
Live View shooting/Movie shooting switch, or other parts. Otherwise, the
wireless connection may be terminated.
16
Select [Wi-Fi function].
1
Press the <M> button, select [Wi-
Fi function] under the [53] tab, and
press <0>.
Select the Wi-Fi function to
2
connect to.
Use <5> or <9> to select an item,
then press <0>.
When the connection settings are not
registered, the setting screen is
displayed.
When the connection settings are
already registered, the reconnection
screen is displayed (p.64).