Medion P62033 Instruction Manual page 65

Assignment of the ISO socket block on the car radio
ISO block
1 3 5 7
B
2 4 6 8
1 3 5 7
2 4 6 8
A
Problems due to incorrect cable connections
In some types of vehicle, the default assignment of permanent plus and alternating
plus has been exchanged by the factory for the ISO block A in the ISO plug. If this
is the case in your vehicle, certain functions may be impaired: for example, stations
may not be stored properly.
To solve this, the red cable (alternating plus) and the yellow cable (permanent plus)
will need to be reversed in the ISO block. The specialist dealer has the appropriate
adapters for this.
66 of 86
84003 DE EN eCommerce Content final REV4.indb 66 84003 DE EN eCommerce Content final REV4.indb 66
BLOCK B -
Speakers
1 rear right +
2 rear right -
3 front right +
4 front right -
5 front left +
6 front left -
7 rear left+
8 rear left -
BLOCK A -
Electricity supply
1
2
3
Permanent plus (per-
manent 12 V supply
4 from main electrical
system);
terminal 30
Car antenna (also for
5 external amplifiers,
etc.)
6
Alternating plus (al-
ternating 12 V volt-
7
age, via ignition); ter-
minal 15
8 Earth; terminal 31
28.05.2015 09:09:19 28.05.2015 09:09:19