Changing The Battery - Silvercrest KH 8105 Operation And Safety Notes

Measurements taken in ear and forehead mode are
automatically stored in the appliance. The measured
values are available again along with information on the
date, time and measurement mode when the "MEM / SET"
button is operated in standard mode. Press the "MEM /
1
SET" button
1
measurement. The "Memory" symbol (memory mode), the
number of the measurement, date, time and measurement
mode will appear in the LC display
the "MEM / SET" button
with its associated measured value will appear. A maximum
of 9 measurements can be stored.
In order to return to standard mode, proceed as follows:
1. Press the "FOREHEAD" button
button
3
display
5
and time, as well as the
2. You are now in standard mode again.
©

Changing the battery

The appliance is fi tted with a lithium battery (CR2032,
3 V ) that allows a lot of measurements to be taken. If
the battery is empty, you will be made aware of that by
means of an appropriate error message (see "Functions /
error analysis - problem-solving").
Functions / error analysis
once to retrieve the value of the last
the next storage space along
1
repeatedly at the same time until the LC
again shows the room temperature, date
(Fig. G). By pressing
5
and the "EAR"
4
symbol (Illustration D).
GB 25