IBM 6550-23N Service Manual page 9

Customizing Your Monitor
Using the LANGUAGE On-
screen Display
English, French, German, Spanish, Italian, Dutch, Swedish,
Russian, and Japanese versions of the OSDs are available.
1
Press the button.
The MENU OSD appears.
2
Press the ./> buttons to select " LANGUAGE" and
press the button again.
The LANGUAGE OSD appears.
L ANGUAGE
ENGL I SH
FRANÇA I S
DEUT SCH
ESPAÑOL
I T A L I ANO
NEDER L ANDS
SVENSKA
3
Press the ./> buttons to select the desired language.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• NEDERLANDS: Dutch
• SVENSKA: Swedish
• : Russian
• : Japanese
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
To reset to English, press the ? (reset) button while the
OSD is on.
10
Using the OPTION On-screen
Display
The OPTION OSD allows you to manually degauss the
screen, adjust the moire cancellation level, and adjust the
OSD position. It also allows you to lock the controls.
Degaussing the screen
The monitor screen is automatically degaussed
(demagnetized) when the power is turned on.
You can also manually degauss the monitor.
1
Press the button.
The MENU OSD appears.
2
Press the ./> buttons to select " OPTION" and
press the button again.
The OPTION OSD appears.
OPT I ON
DEGAUSS
ON
3
Press the ./> buttons to select " (DEGAUSS)."
4
Press the / button.
The screen is degaussed for about 5 seconds.
If you need to degauss the screen a second time, wait for at
least 20 minutes before repeating the steps above.
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
Adjusting the moire
If elliptical or wavy patterns appear on the screen, adjust the
moire cancellation level.
1
Press the button.
The MENU OSD appears.
2
Press the ./> buttons to select " OPTION" and
press the button again.
The OPTION OSD appears.
OPT I ON
DEGAUSS
ON
3
Press the ./> buttons to select " MOIRE* ADJUST."
OPT I ON
MO I RE
AD J US T
2 6
4
Press the ?// buttons to adjust the amount of
moire cancellation until the moire effect is at a
minimum.
* Moire is a type of natural interference which produces soft,
wavy lines on your screen. It may appear due to interference
between the pattern of the picture on the screen and the
phosphor pitch pattern of the monitor.
Example of moire:
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
To reset, press the ? (reset) button while the OSD is on.
Getting Started
Customizing Your Monitor
Changing the on-screen display position
You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
1
Press the button.
The MENU OSD appears.
2
Press the ./> buttons to select " OPTION" and
press the button again.
The OPTION OSD appears.
OPT I ON
DEGAUSS
ON
3
Press the ./> buttons to select " (OSD H
POSITION)" or " (OSD V POSITION)."
Select " (OSD H POSITION)" to adjust the horizontal
position.
OPT I ON
OSD H
POS I T I ON
2 6
Select " (OSD V POSITION)" to adjust the vertical
position.
OPT I ON
OSD V
POS I T I ON
2 6
4
Press the ?// buttons to move the OSD to the
desired position.
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
To reset, press the ? (reset) button while the OSD is on.
11
EN
F
ES
C