Answering Machine Settings - Philips SE155 User Manual

:
2
Scroll to
ANSW.&RECORD
• The answer mode is set.
Note
Depending on the answer mode you have
selected, the appropriate default outgoing
message is played once the answering
machine picks up an incoming call. The
language of the default outgoing message
depends on the country selected in
Welcome mode (see chapter 3.4).
9.6

Answering machine settings

9.6.1 Ring delay
This is the number of rings before the
answering machine answers and starts
playing your greeting message. You can
set the answering machine to start playing
your greeting message after 3 to 8 rings
or Economy. The default ring delay is
m
1
Press
:
to
ANSW MACHINE
<
, scroll
OK
<
press
OK
RING DELAY
:
2
Scroll to your desired ring delay
setting ( to
3
) and press
ECONOMY
confirm.
• A validation tone is emitted and the
screen returns to previous menu.
Tip
Economy mode can save you the cost of a
long-distance call when you check your
messages remotely. If there are new
messages in your answering machine, the
outgoing message will start playing after 3
36
ANSWER ONLY
<
and press
key in idle mode, scroll
and press
:
to
SETTINGS
<
, press to enter
OK
.
or
8 RINGS
<
OK
or rings. If there are no new messages, the
outgoing message will be played after 5 rings.
.
OK
9.6.2
If you are far away from home and want to
check the messages on your answering
machine, you can make use of the remote
access feature to check your messages
using another phone. Once you dial your
home number from any other phone and
enter the remote access code*, you will be
able to obtain the messages on your
answering machine. The keypad on the
phone you use to dial acts like the functions
on your answering machine where you can
play or delete messages, turn your
answering machine on or off, etc.
Note
This feature is deactivated by default.
* Remote access code (which is the same
as your Master PIN code) prevents any
.
5
unauthorised remote access of your
answering machine.
and
9.6.2.1
1
Press
:
<
to
and press
REMOTE ACC.
2
Scroll
DEACTIVATE
confirm.
• A validation tone is emitted and the
Telephone answering machine (TAM)
Remote control access
Activate/deactivate
remote access
m
key in idle mode, scroll
to
ANSW MACHINE
:
, scroll to
OK
<
, scroll
OK
and press
:
to
ACTIVATE
and press
screen returns to previous menu.
and press
SETTINGS
:
to
<
.
OK
or
<
to
OK