Overview of the base station
Decrease (-) or Increase (+) speaker
There are 5 levels of speaker volume.
Short press to switch on/off the
Delete current message during message
Long press to delete all messages when
TAM is in idle mode (unread messages
will not be deleted).
Go to previous message if pressed within
1 second of current message playback.
Replay current message if pressed after 1
second of current message playback.
Skip to next message during message
Play phone messages (the last recorded
will be played first).
Press again to stop message playback.
Long press to start registration procedure.
LED indicator around the
Slow Blinking (1 second interval):
Indicates that there are unread new
Fast Blinking (0.5 seconds interval):
Indicates that the answering machine
memory is full.
Indicates that the answering machine is
Indicates an on-going TAM operation.
Indicates an on-going remote operation