Advertisement
3
Instructions of Use
Firstly
There is a button to regulate the
voltage value on your hair dryer
machine. Be careful about the
equivalance of the sockets voltage
value that you are going to plug
your product in with the voltage
value that you have regu lated with
the regulation button .
The voltage value for Turkey is
220V. If you are going to use your
product outside Turkey, first of
all learn the voltage value used in
releated country.
lt is go ing to be appropriate to use
230V option for 220, 230 and
240 V
and 115V for 110 and 120 V.
Attention!
Do not use your device in an
embedded bath, shower or a sink
which is full of water. Be careful
with your
device to not to get wet from
dropping water on to and never
hold your device with a wet hand.
Do not forget to turn your device
off even if you leave it for a short
time. Try hard to not to cover the
shutter for air taking behind the
device . The security termic will
turn the device because of over
heating in case the hair or the
fingers cover hold your device with
a wet hand.
Do not forget to turn your device
off even if you leave it for a short
time. Try hard to not to cover the
of time for cooling, device will be
working normally.
Do not twist the cord around your
device!
When you recognise any kind of
damage on the cord, take the
device completely to the nearest
Arçelik Service.
To make your device work
Your device has a key composed
of 3 degrees which provides the
heat and speed control of your
device
2: On (Hot air, speedy blow)
1: On (Warm air, normal blow)
O:Off
To Dry Your Hair
Take the extreme water from your
hair after bath and dry your hair by
putting the control key of your
device into hot and speedy blow
4
Advertisement
