Vertex Standard EVX-S24 Operating Manual page 30

Radio Check
You may check the radio status of the selected Contact
Alias.
 Press the assigned PF key to activate the Call feature.
 Press the [  ] / [  ] keys to recall the Contact Alias you
wish to check, then press the [ MODE (
 Press the [  ] / [  ] keys to select "RADIO CK".
 Press the [ MODE (
)] key to transmit the Radio Sta-
tus command to the designated radio. If the designated
radio is alive, the designated radio transmits the ACK
command, and then your radio's display indicates
"ACK RECV". If not, your radio's display indicates
"-NO ACK-".
Revive
You may revive the stunned radio by following the listed
steps.
 Press the assigned PF key to activate the Call feature.
 Press the [  ] / [  ] keys to recall the Contact Alias you
wish to revive, then press the [ MODE (
 Press the [  ] / [  ] keys to select "REVIVE".
 Press the [ MODE (
)] key to transmit the revive
command to the disabled radio. When the stunned ra-
dio receives the revive command, the stunned radio re-
vives, and then transmits the ACK command automati-
cally. Your radio's display indicates "ACK RECV". If
28
A O
DVANCED PERATION
your radio's display indicates "-NO ACK-", the revive
command did not succeed.
Stun
You may stun a selected radio in your fl eet (temporarily
disable from transmitting/receiving) forcibly by remote
)] key.
control.
 Press the assigned PF key to activate the Call feature.
 Press the [  ] / [  ] keys to recall the Contact Alias you
wish to stun, then press the [ MODE (
 Press the [  ] / [  ] keys to select "STUN".
 Press the [ MODE (
mand to the designated radio. If the designated radio
is alive, the designated radio transmits the ACK com-
mand and stuns it. If not, your radio's display indicates
"-NO ACK-", the disabling command did not succeed.
The stunned radio will revive by the "Revive" function
described previously.
S
TATUS
)] key.
Select a 5-Tone status code from the pre-defined status
list.
S
TATUS
Check the 5-Tone receive status code. When you press the
assigned PF key, the display will indicate the "Message"
corresponding to the receive status condition per the pre-
defi ned status list.
)] key to transmit the stun com-
U /D
P OWN
C
HECK
EVX-S24 O
PERATING
)] key.
M
ANUAL