Sharp SM-SX1 Service Manual page 9

AC/DC switching power supply, Output voltage adjustment
+22V Side
G
A
+22V Side
1-bit PWB adjusting method
Connect as shown Fig. 9-2.
AC IN 110-120, 220-240, 230V
AC POWER SUPPLY
UNIT
[Simplified offset voltage adjustment]
1. It is fitted to the mechanical center of VRA1, VRA2, VRA3, and VRA4.(FIg. 10-1)
2. Connect the digital multimeter to the terminals of the speaker, and adjust the voltage between + and – of each terminal to 0 ±
10 mVolt with VRA1 (L-ch) or VRA2 (R-ch). (Fig.9-3)
(OPTICAL)
DIGITAL OUT
Connector
semifixed VOL
From Main PWB
-22V Side
Digital Multimeter
Figure 9-2
-
+
RIGHT
RATED IMPEDANCE : 8
SPEAKERS
R-ch 8Ω SP Terminal L-ch
Output
Check that the AC/DC output voltage is ±22V ±0.15V at the
connector. (If different, adjust the voltage using the semifixed
A
VOL as described above.)
Figure 9-1
+
-
LEFT
Figure 9-3
– 9 –
SM-SX1/SX1W
-22V Side
semifixed VOL
Output
Connector