Table of Contents
Advertisement
Mounting the waste bag
The waste bag
30
table length extension
− Hold the waste bag between the left table width extension and the table length
extension so that the logo on the waste bag is facing the open side.
− Attach the loops on the waste bag to the four premounted screws on the left
table width extension and the table length extension so that the waste bag is
secure.
Connecting the extraction device
− Connect the adapter
connection on the back of the table saw.
− Connect the suction hose to a suitable shaving
extractor (e.g. a multi-purpose vacuum
cleaner) and secure it e.g. with a hose clamp.
Observe the following: A normal household
vacuum cleaner is not a suitable extraction
device.
Operation
Setting the cutting depth
Use the crank
49
the saw table. To set the desired cutting depth:
• Increase the cutting depth: Turn the crank counterclockwise so that the saw
blade is drawn out of the saw table.
• Reduce the cutting depth: Turn the crank clockwise so that the saw blade is
lowered into the table.
Setting the cutting angle
1. Turn the locking bolt
2. Use the crank wheel
3. Tighten the locking bolt by turning it clockwise to fix the saw blade
desired angle.
AFTER SALES SUPPORT
0044 151 649 1500
GB
0044 1890 946 244
IRE
is attached between the left table width extension
6
and serves to collect smaller cutting rests.
25
to the extractor
to rotate the saw blade
46
approx. one rotation counterclockwise to loosen it.
48
to set the desired cutting angle on the angle scale
44
out of the saw table
GB
Operation
5
and the
25
1
or lower it into
47
44
with the
www.einhell.co.uk
IRE
.
23
Hide quick links:
Advertisement
Table of Contents
