ZyXEL Communications ALC-1024L User Manual page 33

alarm
port
Commands with MSC
Table 2-1 Standard Shell Commands
COMMANDS
<tag|untag>]
delete <vid>
name
show
set <vid> <name>
mgmtvid show
set <vid>
show
clear
history <show|clear>
show <slot>
enable <slot-port>
disable <slot-port>
set <slot-port> <profile>
[mode]
profile
show [<adsl|shdsl>
[profile]]
set <adsl|shdsl>
<profile> <parameter>
delete <adsl|shdsl>
<profile>
map <adsl|shdsl>
<profile>
pvc
show
set [slot-port-
vpi/vci] [[<super>]|
[vid=<pvid>]
[priority=<pri>]]
[<llc|vc>]
delete <slot-port-
vpi/vci>
frametype
show <slot>
Commands with MSC
DESCRIPTION
Removes a VLAN entry.
Displays the names of the VLAN entries.
Names a VLAN entry.
Displays the VLAN ID of the management
VLAN.
Sets the VLAN ID of the management
VLAN.
Display alarms on the system and the line
card.
Clears the alarm statistics.
This command displays or allows you to
delete a history of alarm statistics.
Displays a line card's port settings.
Turns on a subscriber port.
Turns off a subscriber port.
Sets a subscriber port.
Shows profile contents.
Creates a line profile.
Removes a line profile.
Displays a profile's port mapping.
Displays PVC settings.
Creates or modifies a PVC setting.
Removes a PVC setting.
Displays frame type tag settings.
2-3