Figure 3-5 List Profiles Command Example - ZyXEL Communications ALC-1024L User Manual

Commands with MSC
3.2.8 Delete ADSL Profile Command
Syntax:
lcman port profile delete <adsl|shdsl> <profile>
where
<adsl|shdsl> = ADSL or SHDSL profile.
<profile> = A profile name.
The profile delete command allows you to delete an individual ADSL profile by its name.
3.2.9 Profile Show Command
Syntax:
lcman port profile show [<adsl|shdsl> [profile]]
The profile show command displays all ADSL/SHDSL profiles.
An example is shown next. This display shows the ADSL DEFVAL profile.
ras> lcman port profile show adsl DEFVAL
adsl profile: DEFVAL
max rate
min rate
latency delay (ms):
max margin
min margin
target margin (db):
ras>
3.2.10 Port Set Command
The command varies depending on your line card models.
port set
Syntax:
lcman port set <slot-port> <profile> <gdmt|t1413|glite|auto>
lcman port set <slot-port> <profile> <anxb|etsi|auto>
where
<slot-port>
<profile >
<gdmt|t1413|glite|
auto>
3-8
latency mode: interleave
up stream down stream
--------- -----------
(kbps): 512
(kbps): 32
4
(db): 31
(db): 0
6

Figure 3-5 List Profiles Command Example

= The slot number and port number (ranging from 1 to 8).
= The profile that will define the settings of this port.
= The operational mode for ALC1024-61 . Choose from glite, gdmt,
t1413 or auto.
2048
32
4
31
0
6
ADSL Port Commands