Lcd Display - Midland Arctic User Manual

14
13

LCD DISPLAY

ARCTIC
F
E
L
DW
I G
DW
DW
A.
Activation of the VOX function.
B. This symbol appears during transmission (when you press
the PTT button) or reception. When the radio is in rx
mode, the led will light up green, while in tx mode it will
be red (high power) or orange (low power).
C.
warns you about the battery status.
D. These three large digits show the selected marine chan-
nel.
E. Indicates the operative band USA / INTERNATIONAL /
DW
CANADA. It can be activated through the optional pro-
DW
grammimg software PRG-G15 , but it is suitable only for
extra EU countries.
DW
F. Appears when the keypad lock is activated.
DW
G. LO (Low) / Hi (High) - shows the selected power level.
I. DW – Appears when you activate the Dual Watch fun-
DW
ction (steady icon) or Triple Watch (blinking).
L
FUN (Function) activated.
M. They give indications about the menu of the radio.
DW
DW
6 |
DW
D M C
E
A
B
Arctic user manual
BATTERY RECHARGE
ARCTIC is equipped for using a 7,4V Li-ion rechargeable battery pack, which
can be recharged by connecting the socket of the AC/DC wall adaptor to a
mains power socket and inserting the jack of the wall adaptor into the desktop
charger plug.
It takes 4 hours to fully recharge the radio.
The led of the desktop charger indicates the status of the recharge:
Red = charging,
Green = full charge
For maximum battery life, we recommend you to charge the battery pack
when ARCTIC is off and the battery pack is fully discharged.
! Using a different battery charger other than the one specified can cause da-
mage to your device or may even cause explosions and personal injuries.
The Battery power saving feature enables a reduction in consumption and saves the
battery life. If it has been set, it automatically activates when the transceiver does
not receive any signal for more than 5 seconds. Power saving can be disabled only
through the Programming software.
Arctic user manual | 7