Roland FR-4X Reference Manual page 46

Menu Options
Parameter Explanation/Value
MusetTyp
(Musette Detune Type)
Specify how prominent the musette
detune should be.
MusetVal
(Musette Detune Value)
This parameter allows you to set type of
the valve noises.
ValveTyp
(Valve Noise Type)
ValveTyp
(Valve Noise Type)
46
Alpine
Italian_H
D-Folk_H
French
Scottish
-100–Std–+100
MEMO
If you've added expansion sounds, you can
select types other than those listed here.
Bandoneon
I-Folk
I-Folk2
Classic
Cajun
Jazz
F-Folk
D-Folk
Organetto
F-Folk2
Classic2
Studio
Tradition
Steierische
OldItaly
TexMex
Trikitixa
F-Jazz
Classic3
Bajan
Parameter Explanation/Value
Use the LEVEL parameter to specify how
prominent the noise should be.
Valve Lv
(Valve Noise Level)
Use these parameters to set the Reverb
or Chorus send levels (how much effect
should be applied to the accordion
Rev Send
section).
(Reverb Send)
Cho Send
(Chorus Send)
This parameter that allows you to shorten
the right hand accordion sounds if you
feel the virtual reeds linger a bit long
Release after you release a key.
(Release Time)
To do so, select a negative value.
Here, you can specify how strongly the
pitch of the simulated Treble reed(s)
changes when you open or close the
bellows faster than usual.
This parameter further adds to the
realism of the sounds emulated by your
FR-4x.
If the
try
If you don't want any detuning effect,
Bel Dtne
select
(Bellows Detune)
When you press the
MIDI Tx
you can have MIDI TX about setting of
(MIDI Tx)
accordion part.
MIDI TX
This page contains a series of MIDI parameters for the selected
register.
You need to set them one by one. These parameters are saved
along with all other Set parameters, which allows you to use diff
erent MIDI settings for each Set – and even each register within a
Set.
Parameter Explanation/Value
This parameter specifies whether note
messages of the right hand keyboard are
transmitted via MIDI.
If this is
transmitted via MIDI.
Note Tx
Turn this setting
(Note Tx)
notes played on the right hand keyboard
to be sounded by an external MIDI-
connected device.
Off, -40–Std–+40
0–127
0–127
-64–0–63
"Standard"
setting seems too mild,
"High " If it is too strong, use "Low "
"Off "
Off
Low
Standard
High
[ENTER/YES]
"Off," note-on messages are not
"Off"
if you don't want
On, Off
(Default: On)
button,