Table of Contents
Advertisement
Export and Import Sets to/from the Optional USB Flash
Drive
The FR-4x allows you to Export or Import Sets to/from a USB flash
drive. These functions can be useful either to back-up your Sets or
to share your Set with other musicians.
Export Sets to the Optional USB Flash Drive
1
Insert the optional USB flash drive into the FR-4x
USB port.
2
In the main screen, press the
[ K ] [ J ]
3
Use the
buttons to select
press the
[ENTER/YES]
[ K ] [ J ]
4
Use the
buttons to select
press the
[ENTER/YES]
5
Press the
[ENTER/YES]
The screen for Export settings appears.
6
If the Type setting is other than
buttons to change Type to
[ J ]
7
Press the
button to access the
8
Use the
[–] [+]
buttons to specify SET File.
Choose from the values in the table below.
Parameter/
Value
Display
SET File
All
Single
If you selected "ALL"
a
Continue to the step 9.
If you selected "Single"
[ K ] [ J ]
a
Use the
buttons and the
"Src SET"
select
and specify the set number that you
want to export.
b
Continue to the step 9
[MENU]
button.
"Utility,"
and then
button.
"Export,"
and then
button.
button.
"SET,"
[–] [+]
use the
"SET "
"SET File"
screen.
Explanation
"ALL"
Select
to export All Sets.
Also the system parameters will
be exported together.
Select
"Single"
to export the
single Set.
[–] [+]
buttons to
[ J ]
9
Press the
button.
The display shows the following screen:
10
To enter the name, use the
the cursor and use the
character.
&
"Assigning a Name"
(p. 20)
[ J ]
11
Use the
button to move the cursor to the far
right, and then press the
A confirmation message appears.
If you decide to cancel, press the
12
Press the
[ENTER/YES]
Export begins, and a screen indicating the export progress appears.
When export is completed, the screen indicates
&
If a file of the same name already exists, you are asked whether you
want to overwrite it.
[ENTER/YES]
Press the
button if you want to overwrite-save the
file.
Press the
[EXIT/NO]
button if you want to return to the previous
screen.
Import Sets to the Optional USB Flash Drive
1
Insert the optional USB flash drive that should
contain the data to be imported into the FR-4x USB
port.
2
In the main screen, press the
[ K ] [ J ]
3
Use the
buttons to select
press the
[ENTER/YES]
[ K ] [ J ]
4
Use the
buttons to select
press the
[ENTER/YES]
5
[ENTER/YES]
Press the
The screen for Import settings appears.
6
If the Type setting is other than
buttons to change Type to
Using Sets
(cursor is blinking)
[ K ] [ J ]
buttons to move
[–] [+]
buttons to select a
[ J ]
button again.
[EXIT/NO]
button.
button to export the set.
"Complete "
[MENU]
button.
"Utility,"
and then
button.
"Import,"
and then
button.
button.
"SET,"
use the
[–] [+]
"SET "
35
Advertisement
Table of Contents
