Table of Contents
Advertisement
Chassis and im-
pact protection
Label
Engine
Parking brake
Flammable materi-
al
Tyres
A
Before and after each use.
B
Annually or every 50 h.
■
By the user when the engine is not running.
□
By the user when the engine is running.
▲
By the authorised service centre.
Preparations
Prior to all maintenance and cleaning work:
1. Let the device cool down for at least
20 minutes.
2. Pull off the spark plug connector.
3. Close the fuel valve and the tank ventila-
tion.
4. For work on the bottom of the device, tilt
the device to the silencer side.
18
Check for rust and fissures and check the welding seams.
Are all protective devices and covers in place, fastened
correctly and properly functioning?
Condition of the labels.
See operating instructions of the engine manufacturer.
Check oil level (see operating instructions of the engine
manufacturer).
Oil change.
Check.
Remove easily flammable debris buildup from the engine
and the device.
Check tyres and, if necessary, the tyre pressure.
Cleaning the device
Depending on use, clean the device thorough-
ly, especially the bottom and the knife.
Grass cuttings and dirt that are stuck interfere
with the grass ejection and impair the cutting
quality. To sufficiently cool the engine, keep
the engine cover, ventilation grid and engine
clean.
■
▲
■
▲
■
▲
■
▲
■
▲
▲
■
▲
■
▲
■
▲
Advertisement
Table of Contents
