Makita DUR361U Instruction Manual page 6

Applicable cutting tool
Cutting diameter with nylon cutting head
Standard battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
Model
DUR361U
DUR362L
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear ear
protection.
Vibration
Model
DUR361U
DUR362L
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For model DUR361U
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Take particular care and attention.
･
Read instruction manual.
Model
Type of handle
No load speed
Overall length
Rated voltage
Net weight
Sound pressure level average
L (dB (A))
PA
82
80
Left hand
2
a (m/s )
h
2.5
2.5
5.1 kg
BL1815N / BL1820 / 1820B
Sound power level average
Uncertainty K
L
WA
(dB (A))
1.7
1.3
Uncertainty K
a
2 h
(m/s )
1.5
1.5
ENG901-1
15m(50 )
FT
END116-1
Cd
Ni-MH
Li-ion
6
DUR362L
Loop handle
3,500 - 6,600 min
1,840 mm
Nylon cutting head
300 mm
D.C. 36 V
BL1830 / BL1840 / BL1840B /
Uncertainty K
(dB (A))
(dB (A))
94 1.7
95 1.3
Right hand
Uncertainty K
2
(m/s )
2
(m/s )
2.5 1.5
2.5 1.5
･
Danger; be aware of thrown objects.
･
The distance between the tool and
bystanders must be at least 15 m.
･
Keep bystanders away.
･
Keep distance at least 15 m.
･
Avoid kickback.
･
Wear a helmet, goggles and ear
protection.
･
Wear protective gloves.
･
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
･
Do not expose to moisture.
･
Top permissible tool speed.
･
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
-1
5.6 kg
BL1850 / BL1850B
Applicable
standard
2000/14/EC
Applicable
standard
EN786
of the European