Ericsson DT190 User Manual page 87

BusinessPhone – Cordless phone DT190
Plug the flat connector of the adapter cable into the rear of
the charger until it snaps in. Connect the adapter to the
mains outlet.
Notes:
Place the DT190 in the charger and charge it for at least 5.5
hours before using it the first time.
Make sure the local mains voltage corresponds to the
voltage on the charger.
Only use the charger that comes with the Cordless phone.
Do not connect the phone to the charger without a battery.
Place the Cordless phone in the charger to charge the
battery.
Complete charging before you subscribe or use the Cordless
phone. The battery meter on the Cordless phone stops flashing
when charging is completed. For more information about charging
the battery, see section "Battery" on page 88.
Installation
87