Before First Use - Ninja CF110 Series Owner's Manual

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
CAUTION: APPLIANCE CREATES HOT LIQUID.
HANDLE WITH CARE.
CAUTION: Never open the brew basket when
the coffeemaker is in use.
CAUTION: Please ensure that you are using
at least a 12 oz. cup for the cup size, 14 oz.
cup for the XL Cup size, 16 oz. travel mug for
the travel mug size and 20 oz. travel mug for
the XL Multi-Serve size to prevent overflow
and a scalding injury.
CAUTION: DO NOT remove the vessel while
the appliance is running without the Drip
Stop in the closed position. Return the
vessel quickly and open the Drip Stop to
continue the brew.
IMPORTANT: DO NOT run the appliance
without water.
IMPORTANT: Always place a vessel beneath
the brew basket to receive the brewed
coffee.
IMPORTANT: DO NOT overfill the water
reservoir. Fill water only to the Max Fill line.
7 1-877-646-5288
1 Remove all packaging material, stickers and labels from
the brewer.
2 Wash the water reservoir, permanent filter, and brew
basket in warm, soapy water with a soft cloth.
3 Rinse and dry thoroughly.
4 Before first use, prime the system by running two
travel mug cycles with water only. After each cycle is
complete, discard the brew.
Assembly
CAUTION: Only fill water reservoir up to, but not exceeding the Max Fill line with water; we recommend fresh,
cool, filtered water. Do not fill water reservoir with any other liquids such as brewed coffee, carbonated
beverages, etc. as other liquids may damage your brewer.
Fig. 1 Fig. 2
Fig. 4 Fig. 5
1 Place the brewer on a dry, clean and level surface.
2 To easily fill the water reservoir, use the hand grips
to lift it straight up off the brewer. (Fig. 1) The water
reservoir lid flips open, and the entire lid is easily
removable for quick cleaning. Add fresh, filtered water
at or above the minimum fill line for your desired
beverage size (Fig. 2), then return the water reservoir
to the brewer and lock into place. (Fig. 3) Do not fill
water reservoir with any other liquids such as brewed
coffee, carbonated beverages, etc. as other liquids may
damage your brewer.
3 Slide brew basket out (Fig. 4) and lift both the
permanent filter and permanent filter carrier from the
brew basket to remove. (Fig. 5) To reinsert, set the
permanent filter and permanent filter carrier back into
the brew basket. (Fig. 6)
Fig. 3
Fig. 6
4 Once the filter is in place, slide the brew basket all the
way in until you hear a slight click.
6 Place your travel mug on the base of the brewer
underneath the brew basket.
NOTE: Do not use any coffee for the first two brew
cycles in order to clean the brewer.
7 Plug the brewer into an electrical outlet.
8 Once all parts are securely in place, press the CLEAN
button to thoroughly clean the machine before first use.
9 Discard the water in the travel mug and repeat,
beginning from step 2, with one more Clean Cycle of
water before first use.
ninjacoffeebar.com 8