Download Print this page

Ninja cf110 Owner's Manual

Coffee bar single-serve system
Hide thumbs Also See for cf110:

Advertisement

Quick Links

1. CLEAN light
illuminates on
the unit.
15
6. Unit will discharge enough descaling
mixture to fill vessel, then pause to
descale the boiler for 15 minutes.
DO NOT touch any buttons during this
time. Unit may dim. Upon completion,
unit will beep 3 times and the Classic
Brew light will turn off.
11. Empty and
12. Fill reservoir to
clean vessel
Max Fill line with
and reservoir.†
water only.
*Descaling solution is available from ninjakitchen.com. Follow your solution's recommended concentration level.
**Fill the water reservoir to the Travel Mug line (16 oz.) with white vinegar, then add water to Max Fill line.
†CAUTION: Do not immerse coffeemaker in any liquid.
Please make sure to read the enclosed Ninja® Owner's Guide prior to using your unit.
NINJA PERFECT CLEAN TECHNOLOGY
All you need is a little maintenance and you'll enjoy delicious coffee, mug after mug.
PHASE 1: CLEAN CYCLE – Will take
2. Fill reservoir to Max Fill line with
descaling solution* and water or
white vinegar** and water.
7. Empty and return
the vessel under
brew basket.
MANDATORY PHASE 2: FLUSH CYCLE – Complete after step 10.
13 . Empty and
return the
vessel under
brew basket.
Repeat steps 13–15 until reservoir is empty.
minutes to complete.
30
3. Place largest available
empty vessel under
brew basket.
8. Press CLEAN
9. Unit will discharge enough descaling
button.
mixture to fill vessel, then beep 3 times.
DO NOT touch any buttons during
this time. Unit may dim.
Repeat steps 7 –9 until reservoir is empty.
14. Press CLEAN
15. Unit will discharge
button.
enough water to
fill vessel and beep
3 times. DO NOT
touch any buttons
during this time.
4-digit Date Code (located on plug prong): First two numbers between 32-52, last number is 16.
4. Select brew size
5. Press CLEAN
to match vessel
button.
used in step 3.
16. Unit will beep 5 times
when complete, and the
CLEAN light will turn off.
10. Unit will beep 5 times
when complete and
continue flashing until
PHASE 2: FLUSH CYCLE
(see below) is complete.
17. Empty and clean vessel
and reservoir.†

Advertisement

loading