Topcom ultra range series User Manual page 22

will switch to handsfree speaker when placed inside base or
charger. You can choose whether or not this function should be
activated.
1. Press twice.
17
4 15
2. Press or repeatedly, select '
3. Press to confirm.
17
4. Select ' ' or ' ' and press
By pressing the voicemail key
pre-programmed number. You can use this to dial for example
your voice mailbox.
To program this number:
1. Press twice.
17
4 15
2. Press or repeatedly, select '
3. Press to confirm.
17
4. Enter the voicemail number from your provider and press
to confirm.
17
If caller ID (CLIP) is activated on your telephone line and
the provider transmits the date and time, the clock is set
automatically when an incoming call is received. Unless
you turn this function off (see below "5.3 Auto clock
adjust"). When you have set the date/time of a handset,
all handsets of that base station will adopt these settings.
1. Press .
17
4 15
2. Press or repeatedly, select '
3. Press to confirm.
17
22
to confirm.
17
for 3 seconds the phone dials the
'.
4
4. Press or
5. Press
17
6. Enter the day and month as two digits each and press
.
17
'.
The date and time will not be lost in the event of a base
station power failure.
1. Press
17
4
2. Press or
3. Press
17
4
4. Press or
5. Press
17
6. Press 4 or
7. Press
17
8. Select the time format (12-hour or 24-hour clock) and press
17
or
Select the date format (DD/MM or MM/DD) and press
When this function is turned on the date and time will be updated
by the callerID data received. This can be turned off as followed:
1. Press
17
4
2. Press or
3. Press
17
4. Press 4 or
5. Press
17
'.
6. Select ' ' or '
15
repeatedly, select '
to confirm.
.
15
repeatedly, select '
to confirm.
15
repeatedly, select '
to confirm.
15 repeatedly, select '
.
to confirm.
.
15
repeatedly, select '
to confirm.
15 repeatedly, select '
to confirm.
' and press to confirm.
17
'.
'.
'.
or
.
17
'.
'.