Norelco at811 Directions For Use Manual page 18

ENGLISH
18
C
C
\
C
2 Press the Shaver Head Release Button to
open the Shaver Head Assembly.
3 Clean inside shaving heads and hair
chamber by running under hot water.
4 Clean outside of Shaver Head Assembly by
running under hot water.
5 Close the Shaver Head Assembly and
shake off excess water.
Be careful not to hit the shaving unit against
anything while shaking off excess water.
6 Open Shaver Head Assembly again and
leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue. This could damage the
shaving heads.
w If you used foam or gel to shave, make sure to
rinse all of it off to prevent residue build-up
from clogging shaving heads.
w If the shaving unit becomes detached from the
shaver, you can easily reattach it.
w You may also clean the hair chamber without
water by using the supplied brush.