Installing / Removing The Base Stand - Alba VL19HDLED-D Instruction Manual

Getting to know your TV
You'll be up and running in no time

Installing / Removing the Base Stand

Base Stand Assembly Instruction
1. Place the TV with the display side down on a flat surface.
Use a cloth to protect. Locate the bottom at the stand.
2. Push the TV stand into the stand column until it snaps
into place.
INSTALLATION NOTES
This TV can be connected to an AC 100-240 Volts,50/60
Hz power supply. Never connect straight to a DC power
supply.
Locate the TV in a room where light does not strike the
screen directly. Total darkness or a reflection on the
screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit
ventilation.
Avoid excessively warm locations to prevent possible
damage to the cabinet or premature component failure.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
WALL MOUNTING INSTALLATION GUIDELINES
1. Place the LED LCD Television onto a solid surface. Please
place some soft material over the front of the screen to
protect it from any damage.
2. Remove the stand .
3. Remove the two screws that secure the stand column to
the TV screen.
4. Remove the stand column.
5. Use the four screws provided to fix the TV onto a wall
mounting bracket (not included) via the four VESA standard
holes on the back of the television.
75 x 75mm VESA mount
Getting to know your TV
13