Alba VL19HDLED-D Instruction Manual page 40

Basic Feature
Simple everyday use
3. A Common Interface main menu will pop up. Press the
buttons to select the items and press the OK button to
confirm.
Viaccess Conditional Access
Main Menu
1. Consultation
2. Settings
3. Upgrade
Press 'OK' to confirm, 'EXIT' to quit
Move
4. Press the EXIT button to exit the menu.
The common interface allows the use of a Common
Access Module to enable you to view scrambled (pay to
view) services. These services are provided by TopUp TV (UK
only) and others. The Common Access Module and viewing
card can be obtained from the service provider.
Do not repeatedly insert or remove the Common
Access Module as this may damage the interface
and cause a malfunction.
This feature is not available in all country.
C CI (Common Interface)
A Allows the Common Access Module to be
in inserted and access the content that has been
encrypted.
To insert the Common Access Module
1. Before you insert the Common Access Module, ensure
that the TV is switched off and the viewing card is inserted
in accordance with the Service Provider's instructions.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Basic Feature
40
Common Interface
OK: Select MENU: Return EXIT: Exit
Common Access Module
2. Insert the Common Access Module into the slot. Flip the
Common Access Module to another side and try again if
you feel resistance.
3. Switch the TV on.
To remove the Common Access Module
1. Before you remove the Common Access Module, ensure
that the TV is switched off.
2. Pull the Common Access Module from the slot.
3. Switch the TV on.
Signal Information (DTV mode)
1. Press the TV.MENU button to display the main menu.
Press the buttons to select Channel in the main menu,
then press the or OK button.
2. Press the buttons to select Signal Information and
then press the OK button to view the Signal Information.
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Move
3. Press the EXIT button to exit the menu.
Lock System management
1. Press the TV.MENU button to display the main menu.
Press the buttons to select Lock System in the main
menu, then press the or OK button,it will highlight the
first option.
2. Use the 0-9 buttons to input a 4-digit password to enter
the Lock System menu.
3. Press the buttons to select the option you want to
4. Press the buttons to change the following
settings.
Channel
Cable
Off
OK: Select
MENU: Return EXIT: Exit