Aerial Connection; Remote Control - Inserting Batteries; Switching The Tv On And Off - Alba VL19HDLED-D Instruction Manual

Getting to know your TV
You'll be up and running in no time

Aerial connection

Connect a coaxial cable (not provided) to the ANT/CABLE
or satellite box.
Cable
Power connection
Connect the power cord plug to the mains power
socket.
Please note: After unpacking, allow the TV
to reach ambient room temperature before
connecting the TV to the mains power socket.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Cable or
satellite box

Remote control - Inserting batteries

Remove the battery cover on the back of the remote
control, gently push down and pull backwards at the same
time as shown .
Insert two AAA/R3 or equivalent type batteries. Ensure
the batteries are inserted the correct way and replace the
battery cover.
Note: When the remote control is not going to be used
for long periods of time, the batteries should be removed.
Otherwise the remote control may be damaged, caused by
battery leakage and corrosion.

Switching the TV On and Off

Switching the TV On
With power cord plug connected to the mains power
socket and TV in 'Standby' mode.
To switch the TV on from standby mode, either:
a: The Remote control; Press the " " button.
b: The TV; Press the " " button on the right of the TV.
Switching the TV Off
Either press the " " button on the remote control or press
the " " button on the right of the TV, the TV will then
switch to standby mode.
Getting to know your TV
AAA/R3 X 2
Batteries
17