Oregon Scientific RM512 Instructions Manual page 11

INTRODUCTION
Thank you for purchasing the Projection Clock . Please read carefully through the following
information and keep these instructions, in case you need to refer to them in the future. If you
pass the product on to someone else, please also include these instructions.
The Radio-Controlled Projection Clock (Projection Clock) displays:
- indoor temperature
- date / time / weekday
- alarm
The Projection Clock is unsuitable for commercial use in weather forecasting or in temperature data
measurement.
PACKAGE CONTENTS
Main unit Power cable
OVERVIEW
1： Press to activate the snooze functon,backlight and projection,
Press and hold to toggle projection on/off.
2：Projection lens
3： In Date mode, press to turn on/off zone. In Alarm time
mode, press to turn on/off alarm. Press and hold to enter time
and date setting.
4： Press to show alarm time of Alarm 1-5 and Alarm 6-7.
Press and hold to enter alarm setting.
5： Press to switch between Temperature and Week Day
display. Press and hold to start RCC signal receiving. In
setting mode, press to increase one unit, press and hold
to increase rapidly.
6: Press to switch between Date and the nearest coming
Alarm time. In projection, press and hold to flip the projection
display in 180 . In setting mode, press to decrease one unit,
press and hold to decrease rapidly.
7：Power jack.
8：Battery compartment. Slide down to open.
LCD DISPLAY
1: Time Display
2: Date display or Alarm time display
3: Temperature display or Week Day display
RCC signal received
Alarm ON
DST ON
Snooze Activated
Low battery indicator
Temperature mode
AAA batteries
for main unit x 2
o
GETTING STARTED
INSERT BATTERIES
1: Remove the battery door from the back
2: Insert 2 R03 (AAA)/ 1.5V batteries. Please ensure the polarities (+/-) of the
batteries match upon installation.
3: Reattach the battery door.
NOTE: Replace batteries when displays, or when the display is dim.
DC POWER
Plug the power cable to the power jack and plug the USB plug to a
5V USB power adapter (Not included).
NOTE: It is suggested to insert batteries as backup power source.
CLOCK
CLOCK RECEPTION
1: Replace batteries or press button will initiate RCC receiving.
2: RCC receiving can be worked in both Date Mode and Alarm Mode.
3: The receiving process duration is 7 minutes.
4: During receiving process, the RCC signal logo
5: During receiving process, press button to quit receiving, press other buttons
can work normally.
6: If process is successful, completed RCC logo
7 minutes, RCC setting will quit automatically.
7: RCC receiving will automatically start at 2:03, 3:03, 4:03, 5:03 every night. Auto
receiving function will cease if it is successful.
NOTE:
Please increase the separation of the main unit and the power adapter to avoid interference of
RCC signal receiving.
The Projection Clock receives WWVB signals as RCC signal.
SET THE CLOCK MANUALLY
1. Press and hold button, enter time and date setting
2. Sequence of setting: Week Day Language
Month Date Hour Minute
3. During setting, the setting parameter will flash.
4. Press button to confirm setting and enter to next parameter
5. Press button once, the figure will increase 1 unit (when setting minute, second will reset to
0). Press and hold the button, the figures will increase rapidly.
6. Press button once, the figure will decrease 1 unit (when setting minute, second will reset to
0). Press and hold the button, the figures will decrease rapidly.
7.If there is no action in 20 seconds, the setting will be saved and will exit the setting mode.
Five languages Week Day display: GER, ENG, FRE, ITA, DUT.
Symbol Monday Tuesday
German GER MON DIE
English ENG MON TUE
France FRE LUN MAR
Italian ITA LUN MAR
Dutch DUT MAA DIN
NOTE: In zone setting, 0 = PST; 1 = MST; 2 = CST; 3 = EST
flashes.
will be shown in display. If it fails within
12/24 Hr Year (2000 – 2099)
Zone DST setting exit
℃/℉
Wednesday Thursday Friday Saturday
MIT DON FRE SAM
WED THU FRI SAT
MER JEU VEN SAM
MER GIO VEN SAB
WOE DON VRI ZAI
Date format
Sunday
SON
SUN
DIM
DOM
ZON