Binning - AVT Bigeye Technical Manual

Camera interfaces
Camera TriggerMode
Bigeye P-629 On
Off
Bigeye P-1100 On
Off
Feature
BinningVertical
BinningHorizontal
Description
Image-on-demand mode.
Electromechanical shutter enabled.
Exposure control via ExposureTime and DarkTime features
(ExposureMode = Timed) or externally (ExposureMode = Off).
Image-on-demand mode.
Electromechanical shutter always open.
Exposure control via ExposureTime and DarkTime features
(ExposureMode = Timed) or externally (ExposureMode = Off).
Image-on-deman mode.
Peltier cooling active.
Exposure control via ExposureTime and DarkTime features
(ExposureMode = Timed) or externally (ExposureMode = Off).
Continuous mode with fixed exposure time and frame rate.
Peltier cooling inactive (power saving).
Table 13: TriggerMode

Binning

Each Bigeye camera variant supports one distinct binning configuration (either
1 x 2 or 2 x 2) which can be switched on or off.
This is controlled using the GigE Vision features BinningVertical and
BinningHorizontal from the ImageSizeControl branch of the feature tree.
In the case of 2 x 2 binning the two features are coupled. This if one of
BinningVertical or BinningHorizontal is changed, the counterpart is
automatically changed, too.
ImageSizeControl
Description
Number of horizontal photo-sensitive cells to combine together.
This increases the intensity (or signal-to-noise ratio) of the
pixels and reduces the horizontal resolution (width) of the
image.
Number of vertical photo-sensitive cells to combine together.
This increases the intensity (or signal-to-noise ratio) of the
pixels and reduces the vertical resolution (height) of the image.
Table 14: Camera standard feature: ImageSizeControl
Bigeye Technical Manual V2.0.0
40