Specifications; Bigeye P-132B - AVT Bigeye Technical Manual

Specifications

Specifications

Bigeye P-132B

Feature
Image device
Effective chip size
Cell size
Picture size (max.)
Lens mount
Pixel format
Frame rate
ADC
Exposure time
Digital output
I/Os
Smart features
Digital interface
Power requirements
Dimensions
Mass
Note The warranty becomes void in case of unauthorized tampering
or any manipulations not approved by the manufacturer.

Specification
Type 2/3, progressive scan, Sony ICX 285AL, interline transfer sensor (no
mechanical shutter required) EXView HAD
8.62 mm (H) x 6.6 mm (V)
6.45 μm x 6.45 μm
1280 (H) x 1024 (V)
C-Mount
Mono8, Mono10, Mono12
up to 12.5 fps (full frame)
up to 25 fps (binning: 1280 x 512)
14 bits
0.1 ms ... 1000 seconds in 76 μs steps
12-bit, GigE
Two inputs (one optocoupled)
three outputs (one optocoupled)
Vertical binning (1 x 2), switchable gain (+ 6 dB), continuous mode
(image acquisition with maximum frame rate), image-on-demand mode
(triggered image acquisition)
With AVT AcquireControl: BCG LUT, auto contrast, auto brightness, ana-
lyze multiple regions within image, real-time statistics and histogram
IEEE 802.3 1000BASE-T (GigE Vision V1.2)
+ 12 V (+5 %), max. 0.8 A
89 mm x 90 mm x 71 mm (L x W x H);
incl. connectors, without tripod and lens
790 g (without lens)
Table 3: Specification Bigeye P-132B
Bigeye Technical Manual V2.0.0
10