Power Source; Dimmer Function - Teac SR-L7XI Owner's Manual

POWER SOURCE

AC Operation
Your unit requires a mains supply. Please ensure that your mains supply is compatible before use.
Insert the mains cable into the power socket at the rear of the unit, and then insert the main plug into a
main supply socket. Press the POWER Button to ON position to operate the unit.
Use Aux In
Press Power Button to turn on the unit and select the Function Switch to iPod mode,
simply connect an audio cable (not included) from the AUX IN jacks on this unit to
external unit's LINE OUT jacks and press the Function Button to AUX mode. This will
allow you to broadcast the external unit's sound through this unit's speakers.
Warning!
If connecting to the headphone output of an audio source, the source's volume
controls may need to be adjusted for optimal sound.
Adjusting the Volume Sound
Rotate the Volume Buttons to increase / decrease the volume sound.

Dimmer Function

Slide the Dimmer Switch to HIGH / LOW dimmer to select LED brightness
Battery Operation (DC 9V) – For Clock Backup
The Battery Back-Up will save the clock and program settings in case of power outage.
The display / unit will not be active without AC power (batteries not included).
How to install or remove the battery : Remove the battery compartment cover on the
back of the unit by carefully pushing one lug of the battery cover. The battery cover can
then be lifted away. Fit 9V batteries (not included), referring to the polarity markings
inside the battery compartment.. Finally, replace the cover. For battery operation, switch
off the mains supply and remove the cable from the power socket, battery operation will
be selected automatically.
Warning!
Danger of explosion if batteries are incorrectly replaced.
Replace only with the same equivalent type.
2